Steel Flanges Trading, Exporting, pipe flange, forged flange, carbon steel flange, manufacturer, exporter, Shandong HyupShin Flanges Co., Ltd flange, pipe flange, forged flange, carbon steel flange, manufacturer, exporter, Shandong HyupShin Flanges Co., Ltd
  • Pipe flanges manufacturer
  • Forged Flanges Company
  • Carbon Steel flanges factory
  • Flanges DIN, ANSI, EN1092-1, JIS, BS4504
  • Steel Flanges Exporter, Supplier
  • 1
  • 2
  • 3
  • 4
  • 5
Home > Flange's News > Flanges > View  
Flanges

What Is an Anchor Flange?

Views:   Post Date: 2/15/2013 9:38:03 AM

An anchor flange is a device installed on a pipeline to combat axial movement. Resembling a collar, once it is attached to a pipe, the anchor flange is commonly anchored into a concrete foundation. Typically placed onto a section of pipeline as it makes a turn or is at a bridge crossing, the anchor flange is used to prevent the pipeline from moving. One of the common traits of a metal pipeline is its inherent movement caused by the flow of liquid through the pipe, as well as from the expansion and contraction caused by temperature changes. When a pipeline makes a sharp turn, the flow of liquid inside of the pipeline attempts to push the pipe in the direction of the flow. By placing an anchor flange on the pipeline and securing it into position by locking it in a concrete pillar buried deep into the ground, the forces pushing against the pipe are displaced into the earth. Another area where an anchor flange is commonly used in a pipeline is at river and bridge crossings. Left unanchored, a pipeline has the tendency to sag when crossing large expanses. This is caused from the weight of the liquid flowing inside of the pipeline. By placing an anchor flange at each side of the crossing, the pipeline is held firmly in place and prohibited from moving. The friction of fluid moving through the pipeline will attempt to push the pipeline out of position over time, if not for an anchor.
The same aspects of movement in a large pipeline are duplicated in smaller versions of hydraulic hard line. As the hydraulic fluid is heated, the hydraulic hard line begins to expand and contract. When anchoring a hydraulic line on a machine or in a machine shop, placing an anchor flange in concrete is not an option. The anchor used in this type of application is commonly secured by bolting the anchor to the machine or the building. This requires a flange that resembles a bearing block, with a bolt hole drilled into each corner of the anchor block. The most common method of fastening a flange to a pipeline or a hydraulic line is to weld the flange solidly into position. This allows the installer to accurately position the flange onto the pipeline where it will offer the most success. When sealing the anchor flange in cement, the concrete is typically poured around the flange and the pipeline after the flange has been welded onto the pipeline.

back    top    next   
Online Service
Skype Chat Now on Skype! Company QQ Chat Now on QQ! WhatsApp +8613969085317 WeChat

Add Wechat ID

Telephone
0086-531-83297728-8001
+86-156 6830 0963
Fax
0086-531-83297728-8007
E-Mail
sale@hyupshin.cn

╱╲
TOP